Polyurea for industry and factories
Coating and protection systems for factories, warehouses, production areas and industrial surfaces exposed to abrasion, moisture, loads and various chemicals. The system is customized to the type of infrastructure, the activity taking place on site and the possible downtime.
For more information on the topic, read the Hot Polyurea for Industry.
Quick answer
Polyurea can be used as part of a protection system for concrete floors, metal surfaces, trenches, pits, enclosures and industrial facilities. It creates a continuous, fast‑curing coating, and compatible systems can provide resistance to abrasion, impact, water and certain chemicals. However, no single system fits every plant. Work loads, material types, temperatures, equipment movement, cleaning requirements and the condition of the substrate must be evaluated before selecting the specification.
What is polyurea for industry?
Polyurea is a two‑component material typically applied by spray using heated equipment at high pressure. After the components are mixed, a rapid reaction occurs, and the material cures into a continuous membrane bonded to the substrate.
In industrial applications, polyurea can be used as a sealing membrane, a protective layer, or part of a flooring system that also includes a primer, an aggregate, a wear layer, and a top finish. Different systems are designed for concrete, steel, and other substrates, but the product and primer must be matched to the surface and the anticipated exposure.
Spray application allows coating even areas with complex geometry:
- Floors and walls
- Corners and rollers
- Machine basics
- Drainage channels
- Drills and casings
- Vertical surfaces
- Metal facilities
- Containers and storage surfaces
- Pipe transitions
- Connections between different areas
What uses might the solution be suitable for?
- Subject to system customization, polyurethane can be considered for:
- Floors in manufacturing plants
- Warehouses and logistics centers
- Operation and unloading areas
- Work surfaces
- areas exposed to forklifts and transport carts
- Technical rooms
Food and beverage plants
- Chemical factories
- Wastewater treatment facilities
- Operational trenches and pits
- secondary fasteners
- Containers and storage facilities
- Energy Systems
- Washing and cleaning areas
- Concrete surfaces exposed to moisture
- Metal parts that require wear and corrosion protection
Manufacturers offer polyurea systems for applications such as production facilities, secondary accelerators, wastewater treatment plants, tanks, pits, and concrete and steel surfaces. Customizing the system for each use depends on the product specification and project conditions.
Key Benefits
Rapid curing and reduced downtime
One of the main advantages of polyurea is its fast response time. In some systems the gel forms within seconds, although the final curing and return to service depend on the product, temperature, and all layers of the system.
The advantage can be significant in a plant where every day of downtime affects production. However, do not open the area to traffic just because the coating is dry to the touch. Operate according to the defined waiting times for the primer, membrane, wear layer, and finish.
continuous layer
The liquid application creates a continuous envelope without joints between sheets. Continuity can be achieved between the floor and walls, around equipment bases, and in areas with many details.
This continuity may help with sealing and protection, but it does not eliminate planned seams. Expansion seams and active connections must be given an appropriate detail that allows them to continue moving.
Wear resistance and impact resistance
Certain polyurethane systems are intended to serve as wear‑resistant coating in manufacturing plants and industrial facilities. The actual result depends on the product composition, membrane thickness, type of wear layer, concrete quality, and onsite loads.
Flexibility and Bridging Over Cracks
Unlike some rigid coatings, polyurethane systems can provide flexibility and the ability to bridge cracks to the level defined in the product specification.
The system does not repair structural cracks and does not prevent joint movement. Active cracks, settlements and shifts in the substrate require diagnosis and treatment before coating.
Suitable for details and complex structures
Spray application allows coating walls, corners, ducts, elevations, bases and non‑flat equipment. This advantage is especially important in an industrial environment where pipes, conveyors, fixed equipment and many passages exist.
Possibility to create a slip‑resistant finish
By combining aggregate and a top coat, a texture suitable for wet areas, ramps and transitions can be created. The grit level does not need to be uniform across the entire plant.
A more aggressive grit may improve grip, but can also make cleaning harder. Therefore it must be balanced between safety, wheel movement, cleanliness and operational requirements.
Polyurea for industrial floors
On an industrial floor, polyurethane should not be treated as a “strong paint.” It is a system that must withstand the actual working conditions.
- Forklift movement
- Rigid wheels
- Tool and product drops
- Equipment hauling
- Pressure washing
- Water and liquids
- Oils and cleaning supplies
- Point load areas
- Vibration from machines
- Variable temperatures
- Need for frequent cleaning
- Limited downtime
When planning a floor, you should evaluate not only the material but also resistance to wear, crack bridging, flexibility, slip resistance, UV stability, adhesion to the substrate, and downtime before reuse.
- A floor system may include:
- Proper concrete foundation
- Concrete repairs and cracks
- Mechanical preparation
- Primer
- Polyurea membrane
- Aggregate distribution
- Wear layer
- Finish coat
- Markings and area allocation
Not on every project the membrane is the top layer where movement occurs. Sometimes it provides sealing and flexibility, and a layer intended to withstand wear and loads is applied above it.
Chemical resistance
Polyurea is considered a coating family that can provide good chemical resistance, but it must not be written or promised that it is “resistant to all chemicals.”
- Durability varies according to:
- Material composition
- Chemical concentration
- Liquid temperature
- Exposure duration
- continuous exposure or temporary release
- Combination of several materials
- Cleaning frequency
- Coating condition
- Finish layer type
System manufacturers publish separate chemical resistance tables for each product, and recommend reviewing the specific material and application.
Before selecting the system, prepare an organized list of the materials existing in the factory:
- Oils
- Fuels
- solvents
- Acids
- Bases
- Salts
- Disinfectants
- Cleaning supplies
- industrial waste
- Hot liquids
- Production Products
The list must be forwarded to the system supplier and checked for compatibility with each material, for the expected concentration and temperature.
Polyurea in wastewater facilities and channels
Industrial wastewater facilities are often exposed to a combination of abrasion, constant moisture, aggressive chemicals, and microbiological activity. Wastewater can contain chlorides, sulfates, and organic acids, and the flow itself can cause abrasion of concrete surfaces.
- A suitable polyurethane system can be used to protect:
- Channels
- Pits
- treatment tank
- Reception Areas
- Separation facilities
- Clamps
- concrete walls
- Service surfaces
- storage facilities
In these applications, an accurate assessment of the chemical composition, hydrostatic pressure, concrete condition, and the potential for moisture or water infiltration behind the coating is required.
Throttles and Secondary Containment
A containment device is intended to limit the spread of liquid in case of a leak or tank failure. Certain polyurethane systems are designed to coat secondary containment structures, but they must be matched to the stored material and the possible exposure duration.
- In the containment device, special attention should be given to:
- Floor-to-wall connection
- Pipe penetrations
- Stitches
- Openings
- Drains
- Slopes
- Concrete condition
- Fluid pressure
- Cleaning capability after an incident
- Compatibility with stored chemicals
- Do not select a system for coating based solely on general water resistance.
Metal surfaces and industrial facilities
Polyurea systems can also be used on steel and certain metals, provided the surface is prepared and appropriate primer is selected. Certain products are specified for application on concrete and steel, including abrasion‑resistant and protective layers.
- Before metal coating, check:
- Metal type
- Rust and corrosion
- old paint
- Oils and Fats
- Coatings
- Sharp edges
- Bolts and Connectors
- Movement and vibrations
- Surface temperature
- Sun exposure
- The following materials are in contact with the device
Generally cleaning, corrosion removal and sanding at the level appropriate for the system are required. Applying over rust, oil or flaking paint does not create a stable base.
Food and beverage plants
In food and beverage areas, durable floors that are easy to clean and suitable for wet, hygienic work environments are typically required. Such facilities may include production areas, washing, cooling, packaging, storage and aisles.
- Before using polyurea in a food plant, you should check:
- Is the product suitable for a food environment?
- Is there direct or indirect contact with food
- Cleaning and disinfection supplies
- Water temperature
- Pressure cleaning
- Fats and food acids
- Drainage and slopes
- Non‑slip finish
- Cleaning ability of the texture
- Regulatory requirements of the plant
Do not present the system as approved for food contact without an explicit document referencing the product and intended use.
Wet areas and drains
In a wet industrial environment, the quality of details around the drains is no less important than the coating quality at the floor’s center.
- Please check:
- Drain height
- Floor slope
- Frame stability
- Metal-to-concrete connection
- Cracks around the drain
- Thermal movements
- Cleaning materials
- Water accumulation
- Cleaning option for the channel
- Connection between the coating and existing channel
Polyurea does not correct an improper slope. If water remains on the floor, consider fixing slopes before applying the system.
Temperatures and Heat
Certain polyurea systems can operate over wide temperature ranges, but heat resistance is a property of a specific product and system. Do not assume that every polyurea is suitable for hot liquids, steam, ovens, or thermal shock.
- Please check:
- Constant operating temperature
- Peak temperature
- Hot water wash
- Quick transition from heat to cold
- Heat transferred from machines
- Hot liquids
- Areas near ovens
- Exposure to fire
Polystyrene is not automatically fire‑resistant. Fire, smoke and flame‑spread requirements must be evaluated separately according to the applicable standard and product.
Marking areas and colors
- Various shades can be designed for:
- Forklift aisles
- Pedestrian crossings
- Risk areas
- Workstations
- Storage areas
- Emergency exits
- Wet areas
- Clean areas
- Boundaries around machines
The marking must be performed using a material that matches the finish layer. In areas exposed to sunlight, you should also verify the color stability under UV radiation.
Some aromatic polyurea systems may change color when exposed to sunlight, so exterior areas may require a more color‑stable finish coat.
Why is substrate preparation critical?
Polyurea hardens quickly, but the rapid hardening does not compensate for poor preparation.
- Before application, remove:
- Weak concrete layers
- Dust
- Oils
- Gray
- Loose paint
- Separate coating
- Industrial dirt
- Ashfera Materials
- Chemical residues
- Rust
Moisture, concrete strength, cracks, joints, slopes and infrastructure stability must also be checked. Polyurea system manufacturers emphasize that site preparation and quality control are prerequisites for execution, even when the material itself offers rapid curing and high mechanical properties.
Treatment of cracks and joints
- Distinguish between:
- static crack
- Active crack
- Cut seam
- Expansion Joint
- Connection between castings
- Connection around a pole or machine
A flexible membrane can bridge certain movements according to its specifications, but you should not cover an active seam without a detail that allows movement.
In the environment of forklifts and carts, it is important to design both sides of the seam. An incorrect connection can create a vulnerable point for the wheels and lead to local deterioration.
Work Process
1. Mapping the activity in the plant
- Before choosing the system, we check:
- What is produced on site
- Which machines operate on site
- Movement type
- Types of wheels
- Equipment weights
- Cleaning materials
- Chemicals
- Temperatures
- Moisture level
- Possible downtime
2. Infrastructure inspection
Checking concrete strength, moisture, cracks, joints, slopes, existing coatings, wear areas and contamination by oils or other substances.
3. System Planning
- Define:
- Primer type
- Repair materials
- Crack repair
- Membrane thickness
- Wear layer
- Abrasion resistance
- Finish type
- Colors and markings
- Work division into sections
4. Clearing and isolating the work area
Remove equipment as much as possible, protect adjacent machines, and isolate the spray area. Take into account spray, noise, dust from substrate preparation, and safety restrictions.
5. Mechanical preparation
According to the surface, we perform polishing, milling, bead blasting, sanding, or other preparation. Afterwards, thorough suction and cleaning are performed.
6. Concrete and metal repairs
Fix holes, crumbling areas, seams, cracks, corrosion and other defects. If there are improper slopes, they must be addressed before coating.
7. Detail treatment
We handle seams, corners, rollers, drains, machine bases, pipe transitions, and connections between different utilities.
8. Primer Application
Select a primer suitable for the substrate, moisture condition, and polyurea system. Different primers may be used for concrete and metal.
9. Polyurea Spraying
The material is applied using professional two‑component equipment. Maintain the mixing ratio, pressure, temperature and thickness according to the product specifications.
10. Wear Layer and Finish
Depending on the application, aggregate, colored wear layer and finish are applied. Wet or sloped areas receive appropriate roughness.
11. Inspection and delivery
- Checking:
- Coating continuity
- Thickness
- Adhesion
- Corner and detail covering
- Stitches
- Drains
- Finish uniformity
- Overlap areas
- Markers
The area is opened for use only after all system layers are completed and according to the manufacturer’s lead times.
Execution in an operating plant
When the entire plant cannot be shut down, execution can be planned in phases.
- The allocation must consider:
- Production lines
- Access to machines
- Forklift movement
- Worker passages
- Emergency exits
- Cleaning areas
- Shift change times
- Ventilation
- Dust and spray prevention
- Connection Between Work Sections
The overlap areas must be planned in advance. New polyurethane is not applied over an old layer without cleaning and preparation according to system instructions.
Cleaning and Maintenance
- Coating maintenance must match the type of finish and plant operation.
- Recommended:
- Remove sand and abrasive particles.
- Clean leaks within a reasonable time.
- Use approved cleaning agents
- Check drains and channels
- Check seams
- Fix local damage early
- Prevent sharp metal dragging
- Use guards under heavy equipment
- Check forklift turning areas
- Check connections around machine bases
Do not regularly use a new cleaning agent before checking its chemical compatibility with the system.
When is polyurethane not sufficient on its own?
- The coating is not a substitute for infrastructure rehabilitation or an engineering solution.
- Additional work may be required when there are:
- Crumbling concrete
- Corrosion of zinc‑coated steel
- Floor settlement
- Active cracks
- Damaged stitches
- Water infiltration from the rear side
- Hydrostatic pressure
- Defective slopes
- Non‑functioning drainage
- Deep contamination in oils
- Equipment movement exceeding floor capacity
- Heat above the defined limit
- Exposure to a chemical unsuitable for the system
- Existing layer not well bonded
In these situations Polyurea can be part of the solution, but it will not resolve the root cause on its own.
What influences the job price?
- There is no single price per sq m that fits every plant.
- Price is affected by:
- Work area
- Infrastructure condition
- System thickness
- Primer type
- Number of concrete repairs
- Oil or chemical contamination
- Number of seams and cracks
- Traffic loads
- Gloss level
- Finish layer type
- Required chemical resistance
- Number of colors and markings
- Equipment accessibility
- Machine removal
- Work in sections
- Work during special hours
- Allowed downtime
- Testing and quality control
A dry warehouse floor does not necessarily require the same system as a wet production area, chemical accelerator, or a trench in a wastewater facility. Therefore, a professional quote should be based on a site visit, plans, and operational information.
FAQ
No. The system must be adapted to loads, infrastructure, chemicals, temperature, humidity, and the cleaning requirements of the site.
Suitable systems can be used in industrial areas exposed to traffic and wear. The weight of the carts, wheel type, traffic frequency, and turning zones should be checked before selecting the specification.
Durability depends on the product and the specific chemical. You must consult the durability table based on material type, concentration, temperature and length of exposure.
In many cases yes, provided the concrete is stable and undergoes proper preparation. Weak areas, oils, paints and coatings that are not well bonded should be removed.
There are systems suitable for steel and metal infrastructure. Rust and contaminants must be removed, appropriate roughness created, and a metal‑compatible primer selected.
Sometimes it is possible, but only after checking the condition of the epoxy, adhesion strength, and compatibility between systems. A new coating over peeling epoxy will not fix the failure.
A system can be designed for wet areas, including a finish with slip resistance. Slopes, drainage, and the connection between floor and walls must be addressed.
Yes, but the slip‑resistance level must meet safety requirements. In an overly wet area, a smooth finish could be hazardous. In an overly rough area, cleaning could be more difficult.
Possibly, depending on the system and its use. Compatibility with cleaning chemicals, the food environment, and regulatory requirements should be verified. Do not rely solely on the material name.
Not every system is suitable for heat or thermal shock. Check the operating temperature and product specifications before selecting.
In some cases the work can be divided into sections. This depends on the plant layout, traffic routes, ventilation, and the ability to isolate the work area.
The duration of the work depends on the site, the substrate preparation, repairs, and the number of layers. Polyurea cures quickly, but surface preparation may be the longest and most important step.
In many cases a local repair can be performed after locating the source of the damage and preparing the edges of the existing coating according to the system.
No. The system can bridge certain cracks according to the specifications, but active cracks and structural movements require dedicated treatment.
The price depends on the floor condition, load requirements, chemicals, abrasion resistance level, number of layers, and whether the work can be performed continuously. An exact price cannot be determined based on area alone.
Planning a coating or refurbishment of an industrial surface?
Send us photos, dimensions and a brief description of the activity on site. Specify which vehicles, machines, cleaning agents or chemicals come into contact with the surface, and we will assess which system might be suitable for the project.